Belimo Actuators

Approx. Rs 15,500 / PieceGet Latest Price

Product BrochureProduct Details:

SY1-230-3-T - 35 NM Belimo Actuator, 230 V Ac
SY2-230-3-T - 90 NM Belimo Actuator
SY3-230-3-T - 150 NM Belimo Actuator, 230
SY4-230-3-T - 400 NM Belimo Actuator
SY1-24-3-T - Deal in Ahmedabad gujarat 

Approx. Rs 10,000 / PieceGet Latest Price

Product BrochureProduct Details:

Belimo damper actuators are designed for use in a variety of HVAC applications and guarantee reliability and reduced current consumption. With a comprehensive torque range (2 Nm to 40 Nm) they are optimised for damper sizes up to 8 m2. They can be mounted directly on damper shafts
Deal in ahmedabad in gujarat 

Approx. Rs 5,500 / UnitGet Latest Price

Product BrochureProduct Details:

Belimo damper actuators are designed for use in a variety of HVAC applications and guarantee reliability and reduced current consumption. With a comprehensive torque range (2 Nm to 40 Nm) they are optimised for damper sizes up to 8 m2. They can be mounted directly on damper shafts Deal in ahmedabad in gujarat 

Approx. Rs 4,000 / PieceGet Latest Price

Product BrochureProduct Details:

ops.belimo make damper actuator

lm230a - 5 nm on off actuator, 230 v supply ip54
nm230a - 10 nm on off actuator, 230 v supply ip54
sm230a - 20 nm on off actuator, 230 v supply ip54
gm230a - 40 nm on off actuator, 230 v supply ip54
lm24a - 5 nm on off actuator, 24 v supply ip54
nm24a - 10 nm on off actuator, 24 v supply ip54
sm24a - 20 nm on off actuator, 24 v supply ip54
gm24a-  40 nm on off actuator, 24 v supply

Safety Notes

• Only authorised specialists may carry out installation. All applicable legal or

institutional installation regulations must be complied during installation.

• The device may only be opened at the manufacturer’s site. It does not contain any

parts that can be replaced or repaired by the user.

• Cables must not be removed from the device.

• To calculate the torque required, the specifications supplied by the damper

manufacturers concerning the cross-section, the design, the installation site and the

ventilation conditions must be observed.

• The device contains electrical and electronic components and must not be disposed

of as househ

 

Product Features

Simple direct mounting Simple direct mounting on the damper spindle with an universal spindle clamp,

supplied with an anti-rotation device to prevent the actuator from rotating.

Manual override Manual override with push-button possible (the gear is disengaged for as long as the

button is pressed or remains locked).

High functional reliability The actuator is overload protected, requires no limit switches and automatically stops

when the end stop is reached.

 

Adjustable angle of rotation Adjustable angle of rotation with mechanical end st

Deal in ahmedabad in gujarat 

Approx. Rs 55,000 / PieceGet Latest Price

Product BrochureProduct Details:

Safety Notes
• The valve has been designed for use in stationary heating, ventilation and air-conditioning systems andmust not be used outside the specified field of application, especially in aircraft or in any other airbornemeans of transport. • Only authorised specialists may carry out installation. All applicable legal or institutional installationregulations must be complied during installation.
• The valve does not contain any parts that can be replaced or repaired by the user.
• The valve may not be disposed of as household refuse. All locally valid regulations and requirementsmust be observed.
• When determining the flow rate characteristic of controlled devices, the recognised directives must beobserved. • The damper must be opened and closed slowly in order to avoid hydronic shocks in the pipe system.

Product Features
Mode of operation
The butterfly valve is opened or closed completely by an open/close rotary actuator. Continuous rotaryactuators are connected by a commercially available controller and move the valve to any positiondesired. The valve disk made of stainless steel is pressed into the soft-sealing EPDM seat by a rotarymovement and ensures leakage rate A (tight). The pressure losses are slight in the open position and thekv value is at a maximum.

Manual Override
Manual throttling or isolation can be carried out with a lever or a worm gear (see «Accessories»).-With lever (DN 25…150): Adjustable in 10 ratchet steps with position indication ( 0 = 0° (angle); 9 = 90°(angle) ) -With worm gear (DN 25...700): steplessly adjustable (self-locking) with position indication.

Approx. Rs 5,850 / PieceGet Latest Price

Product Details:

Damper actuators are responsible for ensuring reliable functioning HVAC systems. Damaged actuators lead to a degradation of system performance which causes 
Belimo Damper Actuators. Clear position indication. Reversible universal clamp. Manual override. Operation and servicing. – PC-Tool, and ZTH. Communication

Approx. Rs 10,300 / PieceGet Latest Price

Product Details:

Damper actuators are responsible for ensuring reliable functioning HVAC systems. Damaged actuators lead to a degradation of system performance which causes 
Belimo Damper Actuators. Clear position indication. Reversible universal clamp. Manual override. Operation and servicing. – PC-Tool, and ZTH. Communication

Approx. Rs 6,000 / PieceGet Latest Price

Product BrochureProduct Details:

Damper actuator for adjusting dampers in technical building installations • Air damper size up to approx. 1 m² • Torque motor 5 Nm • Nominal voltage AC/DC 24 V • Control Open/close, 3-point

Voltage AC/DCAC/DC 24 VPower consumption (running)1 WPower consumption (holding)0.2 WPower Consumption For Wire Sizing1.5 VAConnection Supply ControlCable 1 m, 3 x 0.75 mm²Torque5 NmControl type

• Open/close
• 3-point

Direction Of Motion Motorselectable with switch 0 (ccw rotation) / 1 (cw rotation)Manual overrideWith push-button, can be lockedAngle of rotation95Running time (motor)150 s / 90°Mechanical interfaceUniversal shaft clamp 6...20 mmProtection categoryIP54Degree Of Protection NEMANEMA 2Enclosure TypeUL Enclosure Type 2Ambient Tempreture-30...50°C [-22...122°F]

Approx. Rs 25,000 / PieceGet Latest Price

Product BrochureProduct Details:

Modulating globe valve actuator for 2-way and 3-way globe valves
• Actuating force 2500 N
• Nominal voltage AC/DC 24 V
• Control modulating 0.5...10 V
• Stroke 40 mm


Safety Notes
• This device has been designed for use in stationary heating, ventilation and airconditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.

• Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or aggressive gases interfere directly with the actuator and that is ensured that the ambient conditions remain at any time within the thresholds according to the data sheet.

• Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied during installation.

• The switch for changing the direction of motion and so the closing point may be adjusted only by authorised specialists. The direction of motion is critical, particularly in connection with frost protection circuits.• The device may only be opened at the manufacturer’s site. It does not contain any parts that can be replaced or repaired by the user.

• The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.

Product Features
Mode of operation The actuator is connected with a standard modulating signal of 0...10 V and drives tothe position defined by the positioning signal. The measuring voltage U serves for theelectrical display of the actuator position 0.5...100% and as slave control signal forother actuators.Simple direct mounting Simple direct mounting on the globe valve by means of form-fit hollow clamping jaws.The actuator can be rotated by 360° on the valve neck.Manual override Manual override with push-button possible (the gear is disengaged for as long as thebutton is pressed or remains locked).The stroke can be adjusted by using a hexagon socket screw key (5 mm), which isinserted into the top of the actuator. The stroke shaft extends when the key is rotatedclockwise.High functional reliability The actuator is overload protected, requires no limit switches and automatically stopswhen the end stop is reached.Combination valve/actuator Refer to the valve documentation for suitable valves, their permitted fluid temperaturesand closing pressures.Position indication The stroke is indicated mechanically on the bracket with tabs. The stroke rangeadjusts itself automatically during operation.Home position Factory setting: Actuator spindle is retracted.When valve-actuator combinations are shipped, the direction of motion is set inaccordance with the closing point of the valve.The first time the supply voltage is switched on, i.e. at the time of commissioning,the actuator carries out an adaption, which is when the operating range and positionfeedback adjust themselves to the mechanical setting range.The actuator then moves into the position defined by the positioning signal.Setting direction of stroke When actuated, the stroke direction switch changes the running direction in normaloperation.Adaption and synchronisation An adaption can be triggered manually by pressing the “Adaption” button. Bothmechanical end stops are detected during the adaption (entire setting range).The actuator then moves into the position defined by the positioning signa